Product Description
This Hydraulic camshafts feature a straight profile, and is designed for use with hydraulic flat tappet lifters. The tight lobe separation will boost your torque, throttle response, and mid range power for exciting action at the track and on the road. A true, race type grind, that sacrifices some low-end punch for the more top-end performance, Works best with 2,000 plus Stall, and higher compression and gearing.
- Low vacuum, canister or pump recommended
- Computer-Controlled Compatible: No
- Valve Springs Required:Yes
- Good Horsepower
- Mildly Rough Idle
- Needs Gears and Converter
- 280 Advertised Duration
- 231 Duration @.050
- Pick your Lobe Center
- Valve Lift Base on Rocker Ratio
- 1.5 .450
- 1.6 .480
- 1.75 .560
- Always Check Valve to Piston Clearance
- Always Install New Lifters with Flat Tappet Camshafts
- Some parts are not legal for use in California or other states with similar laws/regulations
